Exterior painting covers the agreed siding, trim, shutters, and doors, with deck or fence staining scoped separately when requested. Cleaning, removal of loose coating, caulking, localized wood repair, and substrate-appropriate primer are considered before finish paint. Failed siding, extensive rot, and water intrusion are repair issues, not defects that a new coat can conceal.
What's included
Site visit to look at the siding and trim to be painted
Cleaning and removal of loose paint where needed
Minor surface repairs, caulking, and spot priming as specified
Painting of scoped siding, trim, doors, and shutters
Deck or fence staining when included in the estimate
Who this service is for
Charlotte metro homeowners with fading, chalking, or peeling exterior coatings who need to separate repainting from underlying repairs.
Why homeowners choose Patriot Home Service
Preparation is discussed by substrate rather than assuming every exterior can be pressure washed the same way.
The estimate can distinguish coating work from replacement of deteriorated wood or siding.
Problems we solve
Peeling trim — Loose paint and exposed wood need preparation and primer before repainting.
Chalky or dirty siding — Contamination left behind can interfere with paint adhesion.
Recurring failure near joints — Failed caulk or trapped moisture should be investigated rather than covered with another coat.
Repair or replace?
Repaint sound siding — Weathered color or localized coating failure can often be prepared and recoated if the substrate is sound.
Replace damaged material — Soft wood, delaminated siding, or persistent water entry should be addressed before paint.
Our process
Review exterior conditions — Identify the substrates, coatings, access needs, and areas needing repair.
Clean and prepare — Clean suitable surfaces, remove loose coating, and allow surfaces to dry before priming.
Repair and coat — Complete scoped minor repairs and caulking, then prime and apply compatible finish paint.
Check and clean up — Review coverage and detail areas, remove masking, and clear work debris.
Dirt, mildew, and chalk should be removed with a method suitable for the surface. Aggressive pressure can damage some siding or drive water behind it; drying before paint is important.
Can you paint over peeling paint?
Loose paint should be removed and the exposed surface prepared and primed. A new coating cannot reliably bond through failing paint.
When is exterior painting appropriate?
Temperature, moisture, and rain forecasts must fit the selected product instructions. Work should not proceed on wet substrates.
Can brick or masonry be painted?
The existing surface and moisture behavior need review before selecting a masonry-compatible coating. Painting masonry changes future maintenance and may not suit every wall.